|Developer(s)||Open Handset Alliance|
|Initial release||September 23, 2008|
|Platform||x86, x86-64, ARM, ARM64, MIPS, MIPS64|
|Type||C standard library|
|License||Three-clause BSD licence|
Bionic is an implementation of the standard C library, developed by Google for its Android operating system. It differs from the GNU C Library (glibc) in being designed for devices with less memory and processor power than a typical Linux system. It is based on code from OpenBSD released under a BSD license, rather than glibc, which uses the GNU Lesser General Public License. This difference was important in the early days of Android, when static linking was common, and is still helpful in introducing Android to software companies used to proprietary operating systems, who can be wary of the LGPL, and unclear about the differences between it and the full GNU General Public License (GPL).
Bionic only supports Linux kernels, but currently supports the arm, arm64, x86, and x86-64 architectures. The platform itself required armv7 with Neon since Marshmallow, though the Android Native Development Kit (NDK) continued to support armv5 (which it called armeabi) up until NDK r16. The NDK still supports armv7 both with and without Neon. Historically there was partial SH-4 support in the platform, but no devices ever shipped and support has since been removed. The NDK never supported SH-4, and MIPS and MIPS64 support were removed from the NDK in r17.
Some parts of the libc source, such as stdio, are from the BSDs (mainly OpenBSD), whereas others, such as the pthread implementation, were written from scratch.
The dynamic memory allocator implementation has changed over time. Before Lollipop there was a single native memory allocator, Doug Lea's dlmalloc. For Lollipop and Marshmallow there were two implementations: dlmalloc and jemalloc. jemalloc gives much higher performance than dlmalloc, but at the cost of extra memory required for bookkeeping. Most devices used jemalloc but low-memory devices still used dlmalloc. For Nougat through Android 10, all devices use jemalloc. Low-memory devices use a "svelte" configuration of jemalloc that disables the tcache to nearly match the lower memory overhead of dlmalloc while keeping most of the speed of jemalloc. In Android 11, the memory allocator for most devices was switched to Scudo, which sacrifices some of jemalloc's high performance for additional security hardening features. Low-memory devices, however, are still permitted to use jemalloc.
Some 64-bit devices, like the Nexus 9, are effectively low-memory devices because of the extra space requirements of 64-bit pointers and hosting of two zygotes. (Zygote is an Android system service that is the parent of all Android application processes.)
The dynamic linker (and libdl) were written from scratch.
Bionic doesn't include libthread_db (used by gdbserver), but the NDK does. The Android platform includes a statically-linked gdbserver, so that developers can use the latest gdb even on old devices.
There is no separate libpthread, libresolv, or librt on Android – the functionality is all in libc. For libpthread, there's no attempt to optimize for the single-threaded case because apps are in a multi-threaded environment even before the first instruction of third-party code is ever run.
The Android platform uses libc++ for the C++ standard library (releases up to and including Lollipop used stlport). The NDK historically offered stlport and GNU libstdc++, but those were removed as of NDK r18. Note that if any native code in an Android app uses C++, all the C++ must use the same STL. The STL is not provided by the Android OS, and must be bundled with each app.
Although Bionic aims to implement all of C11 and POSIX, there are still (as of Oreo) about 70 POSIX functions missing from libc. There are also POSIX functions such as the endpwent/getpwent/setpwent family that are inapplicable to Android because it lacks a passwd database. As of Oreo, libm is complete.
Many of the most-used GNU extensions are implemented in Bionic, as are various BSD extensions.
Platform code uses Bionic directly, but third-party developers use the Android Native Development Kit (NDK). Many third-party developers still target older OS releases, which contributes to a widespread belief that bionic lacks many features. Gingerbread exported 803 functions from libc but Oreo exports 1278 (a 1.6x increase).
Prior to NDK r14, when "unified" headers were first offered on an opt-in basis, the NDK had forked copies of the platform headers for different API levels. This meant that header-only fixes (fixes to constant or structure definitions, for example) weren't available to most NDK users because they'd be targeting an older API level, but platform fixes were only going in to the current platform headers. In the Oreo development period the platform headers were annotated with API level information so that the same set of headers can be used for all API levels, with only those functions available at the developer's targeted API level being visible. These are the so-called "unified" headers, and have been the default since NDK r15.
Prior to NDK r16, the NDK linked a library called libandroid_support.a to code using libc++. This provided functions required by libc++ that weren't in old OS releases. This wasn't the same code used by the platform and introduced numerous bugs (such as breaking positional arguments to the printf family in any code that used libc++). In NDK r16 libandroid_support.a still exists, but is now built directly from platform source (current at the time the NDK is built).
As of Android Jelly Bean MR1 (4.2), Bionic supports similar functionality to glibc's
_FORTIFY_SOURCE, which is a feature where unsafe string and memory functions (such as
memcpy()) include checks for buffer overruns. These checks are performed at compile time if the buffer sizes can be determined at compile time, or run-time otherwise. Because fortify relies on runtime support from libc, its portability to older Android releases is limited. The platform itself is built with
Historically, one of the shortcomings of fortify has been that it's closely tied with GCC, which makes it very difficult to support well in other compilers, like Clang. This meant that when Android swapped to Clang as its default compiler, Bionic's fortify implementation became substantially less useful. In Android Oreo (8.0), Bionic's fortify was overhauled with Clang in mind, resulting in fortify on Clang providing an experience on par with fortify on GCC. Since this overhaul, some checks were added above and beyond glibc's to catch code that — while not necessarily causing undefined behavior — is obviously incorrect. Because this new implementation requires no more libc support than the prior one, the Clang-specific enhancements are available to applications targeting versions of Android before Oreo.
For the creation of Bionic, Google used GPLv2-licensed Linux kernel header files. To get rid of the GPL, Google claimed that it cleaned the header files from any copyright-able work, reducing them to non-copyrightable "facts". Linux creator Linus Torvalds considered Google's behaviour to be acceptable, but Google's interpretation of the GPL has been challenged, for instance by Raymond Nimmer, a law professor at the University of Houston Law Center.
The name "Bionic" comes from the fact that it is part-BSD and part-Linux: its source code consists in a mix of BSD C library pieces with custom Linux-specific bits used to deal with threads, processes, signals and a few others things.
License: we want to keep GPL out of user-space
Edited: 2021-06-18 15:17:20