|Developer||Digital Equipment Corporation|
|Written in||MACRO-11, BLISS|
|Source model||Closed source; kernel source code included|
|Default user interface||DCL and MCR Command-line interface|
RSX-11 is a discontinued family of multi-user real-time operating systems for PDP-11 computers created by Digital Equipment Corporation. In widespread use through the late 1970s and early 1980s, RSX-11 was influential in the development of later operating systems such as VMS and Windows NT.
As the original Real-Time System Executive name suggests, RSX was designed (and commonly used) for real time use, with process control a major use, thereof. It was also popular for program development and general computing.
RSX-11 began as a port to the PDP-11 architecture of the earlier RSX-15 operating system for the PDP-15 minicomputer, first released in 1971. The main architect for RSX-15 (later renamed XVM/RSX) was Dennis “Dan” Brevik.
Commenting on the RSX acronym, Brevik says:
"At first I called the new system DEX-15. It was an acronym for 'Digital's Executive - for the PDP-15.' The homonymic relation between DEC, DEX and deques (used as the primary linkage mechanism in the kernel) appealed to my sense of whimsy. People readily adopted the acronym without question.
But in a short time I was asked to submit the choice to the corporate legal department for a trademark search and registration. They sent me a memo that DEX was already trademarked by some paper company and I would have to rename the product. I pointed out to them that software and paper mills didn't seem to have a hell of a lot of connection, but they wouldn't budge.
So I sat down with pencil and paper, and in a few moments came up with better than a dozen candidate acronyms and names. My purpose was to come up with a good acronym and then find some appropriate words to justify it. For example, X always appealed to me as part of an acronym because it is pronounced so forcefully, inferring (at least to me) some power and drama. I used a lot of X's. These potential acronyms were submitted back to the legal department. At the time I had no favorite.
In a week or so they came back with a subset of my list that they could accept as trademarks. It was left to me to make the final choice.
Bob Decker and I met in my office one afternoon to discuss the choice. Bob was a marketeer who worked for me. I chalked all the candidates on the blackboard and we started going through them one by one, pronouncing each out loud, savoring the sound, trying to get the feel of each one. After ten minutes or so we had narrowed down the selection to three.
Bob sat back in silence as I kept looking at each acronym, seeing how it flowed off my tongue, what impression it gave me, and most importantly, the overall feeling about it. After three or four minutes a strong feeling came over me about one of them. It really felt right. I looked at Bob and announced, "It's RSX". I went to the board and erased all the rest until the only writing left was RSX. It even looked right.
I have absolutely no memory about the other candidate acronyms. They are lost forever, I suppose. Well, maybe there's just a chance that the legal department kept copies of the correspondence - after all they are lawyers and they seem to hold on to everything (especially my money).
Oh, by the way, the acronym stood for 'Real-Time System Executive.' Years later that was changed to 'Resource Sharing Executive,' which I think is even better.
...And that is how RSX got its name, on the 3rd floor of building 5 in the old mill."
The porting effort first produced small paper tape based real-time executives (RSX-11A, RSX-11C) which later gained limited support for disks (RSX-11B). RSX-11B then evolved into the fully fledged RSX-11D disk-based operating system, which first appeared on the PDP-11/40 and PDP-11/45 in early 1973. The project leader for RSX-11D up to version 4 was Henry Krejci. While RSX-11D was being completed, Digital set out to adapt it for a small memory footprint giving birth to RSX-11M, first released in 1973. From 1971 to 1976 the RSX-11M project was spearheaded by noted operating system designer Dave Cutler, then at his first project. Principles first tried in RSX-11M appear also in later designs led by Cutler, DEC's VMS and Microsoft's Windows NT.
Under the direction of Ron McLean a derivative of RSX-11M, called RSX-20F, was developed to run on the PDP-11/40 front-end processor for the KL10 PDP-10 CPU.
Meanwhile, RSX-11D saw further developments: under the direction of Garth Wolfendale (project leader 1972–1976) the system was redesigned and saw its first commercial release. Support for the 22-bit PDP-11/70 system was added. Wolfendale, originally from the UK, also set up the team that designed and prototyped the Interactive Application System (IAS) operating system in the UK; IAS was a variant of RSX-11D more suitable for time sharing. Later development and release of IAS was led by Andy Wilson, in Digital's UK facilities.
Below are estimated release dates for RSX-11 and IAS. Data is taken from the printing date of the associated documentation. General availability date is expected to come closely after. When manuals have different printing dates, the latest date is used. RSX-11S is a proper subset of RSX-11M, so release dates are always assumed to be the same as the corresponding version of RSX-11M. On the other side, RSX-11M Plus is an enhanced version of RSX-11M, so it is expected to be later than the corresponding version of RSX-11M.
|March 1973||RSX-11A 1.0|
|May 1973||RSX 11D 1.0|
|December 1973||RSX-11C 7A||Final release of RSX-11C|
|November 1974||RSX-11M 1.0|
|June 1975||RSX-11D 6.2||Final version of RSX-11D|
|September 1975||RSX-11M 2.0
|RSX-11S 1.0 never existed|
|December 1975||IAS 1.0|
|April 1977||RSX-11M 3.0
|December 1977||RSX-11M 3.1
|May 1979||RSX-11M 3.2
|RSX-11M Plus 1.0|
|bef. October 1979||IAS 3.0||Final major release of IAS|
|November 1981||RSX-11M 4.0
|RSX-11M Plus 2.0|
|April 1983||RSX-11M 4.1
|RSX-11M Plus 2.1|
|July 1985||RSX-11M 4.2
|RSX-11M Plus 3.0||Micro/RSX 3.0|
|September 1987||RSX-11M 4.3
|RSX-11M Plus 4.0||Micro/RSX 4.0||Final Micro/RSX version|
|May 1988||RSX-11M 4.4
|RSX-11M Plus 4.1|
|January 1989||RSX-11M 4.5
|RSX-11M Plus 4.2|
|January 1990||RSX-11M 4.6
|RSX-11M Plus 4.3|
|May 1990||IAS 3.4||Final IAS Release|
|February 1993||RSX-11M 4.7
|RSX-11M Plus 4.4||Last release from Digital Equipment|
|March 1995||RSX-11M Plus 4.5|
|November 1998||RSX-11M 4.8
|Released by Mentec|
|February 1999||RSX-11M Plus 4.6||Micro/RSX 4.6||Released by Mentec|
RSX-11 is proprietary software. Copyright is asserted in binary files, source code and documentation alike. It was entirely developed internally by Digital. Therefore, no part of it is open source. However a copy of the kernel source is present in every RSX distribution, because it was used during the system generation process. The notable exception to this rule is Micro-RSX, which came with a pre-generated autoconfiguring binary kernel. Full sources was available as a separate product to those who already had a binary license, for reference purposes.
Ownership of RSX-11S, RSX-11M, RSX-11M Plus and Micro/RSX was transferred from Digital to Mentec Inc. in March 1994 as part of a broader agreement. Mentec Inc. was the US subsidiary of Mentec Limited, an Irish firm specializing in PDP-11 hardware and software support. In 2006 Mentec Inc. was declared bankrupt while Mentec Ltd. was acquired by Irish firm Calyx in December 2006,. The PDP-11 software, which was owned by Mentec Inc. was then bought by XX2247 LLC, which is the owner of the software today. It is unclear if new commercial licenses are possible to buy at this time. Hobbyists can run RSX-11M (version 4.3 or earlier) and RSX-11M Plus (version 3.0 or earlier) on the SIMH emulator thanks to a free license granted in May 1998 by Mentec Inc.
Legal ownership of RSX-11A, RSX-11B, RSX-11C, RSX-11D, and IAS never changed hands; therefore it passed to Compaq when it acquired Digital in 1998 and then to Hewlett-Packard in 2002. In late 2015 Hewlett-Packard split into two separate companies (HP Inc. and Hewlett Packard Enterprise), so the current owner cannot be firmly established.[dubious ] No new commercial licenses have been issued since at least October 1979 (RSX-11A, RSX-11B, RSX-11C) or 1990 (IAS), and none of these operating systems have ever been licensed for hobbyist use.
In 1968, the Soviet Government decided that manufacturing copies of IBM mainframes and DEC minicomputers, in cooperation with other COMECON countries, was more practical than pursuing original designs. Cloning of DEC designs began in 1974, under the name of SM-EVM (Cyrillic:СМ ЭВМ). СМ ЭВМ is an acronym for 'Система Малых электронно-вычислительных машин' – which is Russian for 'System of Small electronic computing machines'. As happened with ES EVM mainframes based on the System/360 architecture, the Russians and their allies sometimes significantly modified Western designs, and therefore not every SM-EVM machine is compatible with DEC offerings of the time.
A clone of the RSX-11M operating system ran on the Romanian-made CORAL family of computers (such as CORAL 2030, a clone of PDP-11).
RSX-11 was often used for general-purpose timeshare computing, even though this was the target market for the competing RSTS/E operating system. RSX-11 provided features to ensure better than a maximum necessary response time to peripheral device input (i.e. real-time processing), its original intended use. These features included the ability to lock a process (called a task under RSX) into memory as part of system boot up and to assign a process a higher priority so that it would execute before any processes with a lower priority.
In order to support large programs within the PDP-11's relatively small virtual address space of 64 KB, a sophisticated semi-automatic overlay system was used; for any given program, this overlay scheme was produced by RSX's taskbuilder program (called TKB). If the overlay scheme was especially complex, taskbuilding could take a rather long time (hours to days).
The standard RSX prompt is ">" or "MCR>", (for the "Monitor Console Routine". All commands can be shortened to their first three characters when entered and correspondingly all commands are unique in their first three characters. Only the login command of "HELLO" can be executed by a user not yet logged in. "HELLO" was chosen as the login command because only the first three characters, "HEL", are relevant and this allows a non-logged in user to execute a "HELP" command.
When run on certain PDP-11 processors, each DEC operating system displays a characteristic light pattern on the processor console panel when the system is idle. These patterns are created by an idle task running at the lowest level. The RSX-11M light pattern is two sets of lights that sweep outwards to the left and right from the center of the console (inwards if the IND indirect command file processor program was currently running on older versions of RSX). By contrast, the IAS light pattern was a single bar of lights that swept leftwards. Correspondingly, a jumbled light pattern (reflecting memory fetches) is a visible indication that the computer is under load (and the idle task is not being executed). Other PDP-11 operating systems such as RSTS/E have their own distinctive patterns in the console lights.
RSX-11 M/FEP and the FRP (FORTRAN Real-Time Package) ...
For these reasons, RSX-11M was chosen as the basis for RSX-20F.
Edited: 2021-06-18 18:37:36